Tom Rages On
Beginner
Currently, I am running a MeanWell RT-125A psu with a Minigun supergun, but I have to crank it to the max to get stable play out of my PCB (Primal Rage). It's been about a year, and I've noticed some degradation over time. It was running the game at 5.3v, and is now closer to 5.1. If voltage drops to about 4.8, things start to get unstable.
At the current rate the PSU is degrading, I have about another year on it. I suppose I could buy a new RT-125A every couple of years, but I'd rather just have something that's going to run for another decade before I have to replace it.
Original arcade cabs ran on switching power supplies, but I am not above suggestions that are gross overkill like a 600w linear PSU or something.
Power requirements as per manual:
-5v @ 1A
12v @ 2A
+5v @ 12A
At the current rate the PSU is degrading, I have about another year on it. I suppose I could buy a new RT-125A every couple of years, but I'd rather just have something that's going to run for another decade before I have to replace it.
Original arcade cabs ran on switching power supplies, but I am not above suggestions that are gross overkill like a 600w linear PSU or something.
Power requirements as per manual:
-5v @ 1A
12v @ 2A
+5v @ 12A