replacing scsi cd-rom drive with scsi sd card adapter?

[Darksoft]

I also prefer BlueSCSI or SCSI2SD over any other solution out there.

 

[xodaraP]

I’m pretty sure the ZuluSCSI is made by the same creator as the SCSI2SD because they were no longer able to source parts

I’m a big fan of the BlueSCSI though

 

[Mitsurugi-w]

Yeah bluescsi works good for me too.

 

[Orakelschaf]

Just to be sure: "BlueSCSI v2 Desktop" works with the CPS3?

 

[8bitforlife]

my cps3 multi was working today now its stuck at reading cdrom screen and i cant access menu at all

 

[8bitforlife]

i think my scsi bus controller is ether bad or the solder has gone cold

 

[mR_CaESaR]

Are you having a similar issue like this?

https://www.arcade-projects.com/thr...-scsi-sd-card-adapter.300/page-36#post-321309

If so, the fix for mine was reflowing the SD card area as Cruzlink mentioned

 

[8bitforlife]

Are you having a similar issue like this?

https://www.arcade-projects.com/thr...-scsi-sd-card-adapter.300/page-36#post-321309

If so, the fix for mine was reflowing the SD card area as Cruzlink mentioned

not unless both my bluescsi and scsi2sd both developed the problem at same time

 

[8bitforlife]

it just sits at looking at cd screen but if flex or press the scsibus chip i get what that link describes. i can quickly enough get into menu when i flex or press chip it tells me theres no files and it hangs

 

[cruzlink2]

it just sits at looking at cd screen but if flex or press the scsibus chip i get what that link describes. i can quickly enough get into menu when i flex or press chip it tells me theres no files and it hangs

reflow the chip it might have bad solder joints.

 

[8bitforlife]

reflow the chip it might have bad solder joints.

atm with my condition i cannot attempt to do it. im sending it to someone ill ordered a new chip just incase.