What's new
By:
Filters

OpenJVS - JVS Emulator

arcadeWC said:
I have the same issue; hopefully someone sheds some light on it. I haven’t been able to really get the Aimtraks to work well with OpenJVS and they don’t appear as configured in the menu.
Click to expand...
Hello!

WiPi doens't properly support how AimTraks work in OpenJVS - they're non standard controllers so they have to be handelled seperately.

https://github.com/OpenJVS/OpenJVS/blob/master/docs/openjvs/devices/ultimarc-aimtrak

You would find the device configuration file in /etc/openjvs/devices/ultimarc-aimtrak - you may have to ssh into the machine to edit it.
 
Just a note to say I've *finally* revisited this and setup a usb wii sense bar and connected a wii remote to the pi4 and it works great for Naomi gun games.
I am dumb as it took me a while to understand that the pi hat replaces the jvs i/o card completely and doesn't plug into it.

My ranking of the naomi gun games so far:

House of the Dead 2
Maze of The Kings
Confidential Mission
Death Crimson OX
Lupin The Shooting
Ninja Assault (the voice acting is just the worst!)


Thanks again bobbydilley!
 
I picked up one of the Pandora's Box light gun setups, works great out of the box but I've been meaning to get it tested with this JVS adapter... too many projects, not enough time.
https://retroshooter.com/
 
Mrhide said:
@bobbydilley how did you connect time crisis2 to (open)jvs / usb connector?
Click to expand...
1701686568383.png
 
bobbydilley said:
How accurate are the guns? Are they line of sight perfect?
Click to expand...

In a living room environment they're not bad at all. Don't know that they would work well on an arcade cabinet due to the closeness of the screen by comparison. Nifty thing about the setup is they have foot peddles pre-configured to use with the pandoras box. So time crisis etc play as they should. I read that they're going to release a more compact bare LED set for use with arcade cabs (could also just build our own) since these are supposed to work with the JAMMA pandoras box 10.
 
Sp33dFr34k said:
Definitely works with just tapping csync as I've got it working that way with RGB-Pi in my NAC.
Click to expand...
Thank you for sharing this information. I have a 31khz only monitor in my candy cab and wanted to know if the guncon 2 works with openJVS hat for the Naomi. When I have a crt? Do I still need sensors or does it work without sensors?
 
Guncon 2 should work without sensors, it does for MiSter, with an adapter for sync, but there you have to turn on sync on green, and then plug into the green video signal with the yellow splitter, I don't know this but since Sync sits on a separate pin, you could possibly make a RCA adapter that splices into sync on a monitor or the MiSter community has some VGA-RCA-VGA adapters you might want to try... something like this:
https://misteraddons.com/products/guncon-accessories
Again no guarantees, I'm still working with trying to get that and the zapper to work with Snac, and it does work, but I wonder if it's my brightness that I need to drive up, or my calibration as it's not 100% on all the gun games I've tried....
 
You must log in or register to reply here.
Back
Top