Tekken 5 art Leg cover New Net City Tekken 5 Japanese

[chacal231077]

Hello

Someone has already scanned the sides of Tekken 5 of a New Net City Tekken 5 & clean, verctorized?


Thank you

J

 

[PascalP]

Would be nice is someone has!

 

[twistedsymphony]

I've never seen any, but that doesn't mean they're not out there.

I'd be interested if it's out there.

I'm still looking for proper Typing of the Dead Side rail art.

 

[chacal231077]

I Have a 3 New Net City Tekken 5 , but I do not know how to scan the sides and I do not know vectorized .


How many DPI do I need to configure my scanner & what image format ?


I have a HP Scanjet 4500c

 

[twistedsymphony]

for artwork that is larger than your scan bed, you need a scanner without a raised "lip" around the scan surface.

BAD:

For arcade artwork most people use HP "See-through" scanners because they have no lip, so you can scan large artwork in sections

GOOD:

How many DPI do I need to configure my scanner

As high as possible

what image format

BMP and TIFF preserve quality the best but the file size will be enormous.

I do not know vectorized

Scan first, worry about Vectorization later... they are two separate problems.

But if you're interested in learning...

 

[PascalP]

Any particular model HP scanner?
Want to scan my Cyberlead artwork as well

 

[chacal231077]

I do not have the budget for this type of scanner for now Sniffff.

but it is very interesting

 

[twistedsymphony]

Any particular model HP scanner?

The one I posted a picture of. They're listed as "See through" scanners. there are several models like it.

The one's I've seen are all HP ScanJet 46xx models, but it may be under a different model number outside of the USA.

I have a ScanJet 4670 personally, though it's not working properly so I may need to pick up another one.

I do not have the budget for this type of scanner for now Sniffff

I've bought 6 of them for around $60 USD a piece... what is your budget?

 

[nem]

You can also try to decase your scanner to remove the lips. I did this to my Canon CanoScan LiDE 210. Works fine for scanning control panels, not so good for cab art. Naomi legs would work OK.

 

[twistedsymphony]

You can also try to decase your scanner to remove the lips.

works on some scanners, not on others. I know the few I've tried this with were designed such that the rail system was integrated into the case. but I've seen others with some success.