SEGA SYSTEM-16 MULTI - OLED BASED GAME SELECTOR
- Thread starter Frank_fjs
- Start date
- Status
Is there anyone whom either already has the S16 multi or has had it shipped in need of a selector?
tom5151
Enthusiast
Yes, I've just paid for the s16 multi.
I've expressed my interest in the previous page for your selector and remote
I've expressed my interest in the previous page for your selector and remote
AlxUnderBase
Enlightened
Please , Frank ! When my unit is ready i'd like the remote PCB along oled selector too. (in fact, i will get the full kit) . All good with , Mitsu about my System16 B multi pcb too !
Don't know if it's still available but I've got the multi and I'd really like the selector
SiQux
Student
My multi just shipped.
I will most definitely need a selector.
Only main PCB
I will most definitely need a selector.
Only main PCB
mathewbeall
Champion
Argh - somehow missed being on the list! Please add me! Full Monty.
Matt
Matt
Added the two gentlemen above me to the list.
funkycochise
Student
can you add me to the list (I saw your sale topic after reading your wip topic) ?
Thank you.
Thank you.
Done!
Just updated my selector with the new firmware, the Attract Mode is running awesome! Good work @Frank_fjs
I'm still busy adding to the code / feature set...
Latest thing I've developed is the ability to program in your own IR remote. Still needs fleshing out but it's working, just needs more testing.
Latest thing I've developed is the ability to program in your own IR remote. Still needs fleshing out but it's working, just needs more testing.
duffcon
Professional
The selector looks awesome! In my planned 16b cab, My PCB has the Jamma harness side up front in a drawer attached to the control panel. This makes the PCB easy to access but unfortunately, the DIP selectors on the opposite side of the drawer opening. This means that I would really need to pull the drawer way out to get to the dips (cable length issues). I'm curious if it's possible to work some kind of extension cable where the selector can be mounted on the Jamma harness side. Or is it more logical to look into the rotary switch device? Thoughts?
The remote selector panel for this connects to the PCB mounted on the DIP header by USB-C cable. You can just buy the length of cable you need. I’m using a 2m one now.
With the next firmware released you are able to program any IR remote control to use with the selector. So if you mount the remote somewhere visible on your cab, it’s super easy to select games to play.
With the next firmware released you are able to program any IR remote control to use with the selector. So if you mount the remote somewhere visible on your cab, it’s super easy to select games to play.
Last edited:
You can run a separate wired remote board via a USB C cable anywhere you need to. This wired remote board contains everything you need to operate the selector, that being tactile buttons and an OLED screen.
If you're able to leave your cab door slightly open you can also use any IR (infrared) remote control you may have lying around the house. E.g. OSSC remote, TV remote etc.
Perfect for your situation where the S16 PCB is tucked away inside a cab and not easily accessible.
If you're able to leave your cab door slightly open you can also use any IR (infrared) remote control you may have lying around the house. E.g. OSSC remote, TV remote etc.
Perfect for your situation where the S16 PCB is tucked away inside a cab and not easily accessible.
- Status