So I got this cabinet and I want to rewire it to eventually support a cps3 and want to do the wiring my self. Time being I have an Xbox and a Dreamcast inside of it. While I was trying to remove some wires I cut one coming from the Sega amp. I don't know where to reconnect it to but the audio is no longer coming out from the speakers. I don't know how to navigate this cabinet but would appreciate a push in the right direction. The cable highlighted is the one that was cut.
- Thread starter gigosai
- Start date
spartan1337
Student
That plug is the volume control and goes to the potentiometer. Two of the pins are shorted like in your picture. 2+3 maybe.
The others are left, middle and right and go to the pot. I can check on one I have and confirm.
Here is a page where someone is troubleshooting the sound and has some details.
The others are left, middle and right and go to the pot. I can check on one I have and confirm.
Here is a page where someone is troubleshooting the sound and has some details.
Ok, this thing is a fortress and I've been struggling to find a guide for a Sega upright cabinet. Any suggestions?
I have the same cab: There's a plate that needs to be removed (forever) between the control panel and the back that will give you a WAY better access:
it's a great cab btw because all looms are there, analog included.
I love this cab. Although my dream is a Naomi Universal, I'm really enjoying this one.I have the same cab: There's a plate that needs to be removed (forever) between the control panel and the back that will give you a WAY better access:
it's a great cab btw because all looms are there, analog included.
Does this cab have degaussing built into itI have the same cab: There's a plate that needs to be removed (forever) between the control panel and the back that will give you a WAY better access:
it's a great cab btw because all looms are there, analog included.
There is no "degauss button" but for me, the SEL button of the monitor control board acts as a degaus button:
