Request: Sega Naomi mounting feet screw size?

[Kujako]

I have a set of mounting feet I wish to attach to my Naomi, but I can't seem to figure out the correct screw size to mount the feet. Anyone have an idea?

For reference these things...

 

[Foxe]

I have the screws with them, let me take a look and see if I can figure it out.

 

[Kujako]

I have the screws with them, let me take a look and see if I can figure it out.

Thanks, appreciated. Trying to avoid lugging the Naomi to the hardware store...

 

[Foxe]

I'm by far not a pro, so forgive me if these are off...

https://imgur.com/a/SpZfgSi

The measurements look to be...

3.5mm screw width
9mm screw height
1.75mm between screw threads
9mm rounded philips head

6 of them.

 

[Kujako]

I'm by far not a pro, so forgive me if these are off...

https://imgur.com/a/SpZfgSi

The measurements look to be...

3.5mm screw width
9mm screw height
1.75mm between screw threads
9mm rounded philips head

6 of them.

Thanks, looks like they're self tapping which gives room for error.

 

[Foxe]

I hope those measurements are okay. Also, self tapping is probably not what you want? These go into the Naomi, right?

 

[Kujako]

I hope those measurements are okay. Also, self tapping is probably not what you want? These go into the Naomi, right?

Correct, but I don't think they go into a threaded hole... could be wrong about that. Will experiment a bit and see what I can figure out.

 

[Kujako]

TIFU... I blame smoke inhalation from my home Sate being on fire. Will try again.

 

[Kujako]

After some experimentation, I went with 6gauge x 1/2inch US screws. Seem to be a perfect fit. Thanks @Foxe.