NVS-4000 (and blast city PSU) connectors

[bartre]

Hey all,
I've got an NVS-4000 power supply missing the connectors for DC out 1&2 and AC 100V in & out

These are soldered to the PCB normally, does anyone have the part number so I can order replacements?

 

[AlxUnderBase]

Hey all,
I've got an NVS-4000 power supply missing the connectors for DC out 1&2 and AC 100V in & out

These are soldered to the PCB normally, does anyone have the part number so I can order replacements?

Even @Lemony Vengeance had struggle to find these parts :

https://www.instagram.com/p/CqgHhUUJniG/?igshid=YmMyMTA2M2Y=

Cheers

 

[Lemony Vengeance]

Hey all,
I've got an NVS-4000 power supply missing the connectors for DC out 1&2 and AC 100V in & out

These are soldered to the PCB normally, does anyone have the part number so I can order replacements?

dude.. I wish you luck with this. I was quoted $20 per connector for the 34 pin socket today

 

[bartre]

well poo I guess.
suppose I'll just scrap them from a parts board (once I find one)

 

[300wins]

Wait, some dickhole sold you a power board without those connector? What a bastard.

 

[chriszhxi]

These are TE AMP Universal Power connectors, info here
https://gateninety.com/tutorials/amp-up/

You can buy them from any electronic websites like Digikey or Mouser, buy the connectors, pins and wires and diy it.
Wires should be UL1007 20AWG.

 

[nem]

OP needs the headers.

https://www.te.com/usa-en/product-282326-1.html
https://www.te.com/usa-en/product-282328-1.html

Good luck finding anyone stocking them.

 

[Lemony Vengeance]

OP needs the headers.

https://www.te.com/usa-en/product-282326-1.html
https://www.te.com/usa-en/product-282328-1.html

Good luck finding anyone stocking them.

Digikey has the 24 pin headers.
The 30 pin headers are tough to find. But they’re out there. I was quoted $20 for one header.

 

[nem]

Digikey has the 24 pin headers.

Not the right angle ones.

 

[YerpS3s]

Anyone carrying this connector?