SOLD AWSD/Egret 3 PFX Chassis Trays

[bagheera369]

I found this pic from when I installed one of the first run trays. The tube is vertical and counterclockwise here and you can see the yoke wires are definitely long enough.

Yeah, Mine are from Sega, and NOT using the LG tubes.

In CCW, neither connector was gonna reach the chassis.

Good information to know, and I'm glad yours worked without issue.

Hopefully most of the other people who are using these, had the LG tube, and face no issues!

I'll get my pics up, showing the difference by the end of week.

 

[themisterfalcon]

Yeah, Mine are from Sega, and NOT using the LG tubes.

In CCW, neither connector was gonna reach the chassis.

Good information to know, and I'm glad yours worked without issue.

Hopefully most of the other people who are using these, had the LG tube, and face no issues!

I'll get my pics up, showing the difference by the end of week.

Another viable option is simply building some yoke extension wires like Remy makes.

There is someone here smarter than me who will tell you what the tolerances are for something like that. But I for instance used yoke extension wires to install a MS8 in my Canary and it was fine.

Curious to hear what kind of tube you have!

 

[bgwelistyl]

Damn, I need one of these. Sad I missed the boat. Anybody have a spare one around? Or a possible alternative

 

[bagheera369]

Damn, I need one of these. Sad I missed the boat. Anybody have a spare one around? Or a possible alternative

If @themisterfalcon doesn't have any left, I have one of the units that had the guide-tab hole cut wrong (as you can see if you look back in this thread).

It's an easy fix on the chassis to still use the tray, and this one is still wrapped.

Hit me up via PM if you need it.

 

[kazuo]

If he passes and it'll work with a Toshiba PF chassis, I'll take it.