What's new
By:

Atomiswave Multi

Mrhide said:
Guys, why?

The updated list is the second post at https://www.neo-arcadia.com/forum/viewtopic.php?t=80078.

In big red letters, he wrote in french:


which translates to



I understand everyone is eager to get his or her board but READ and RESPECT what AJE_FR wrote.
He is a one guy operation doing this as a hobby.
If you can't respect that, don't be on the list and please don't mess it up for everyone else by pissing him enough that he leaves this hobby.

Thank you.
Click to expand...
DUDE....I'm not talking about the AW list....I see my place on it, it's fine.

I'm talking about the Psykio list, where we had a list here, and a list there, and the list here was taken, and is being gone through, but no listing of the AP list over on NA forums, and no real way to keep tabs on it.

I'm not attacking AJE in any way...I understand his operation, we all do by now.....I just would like to be able to visually tell where I'm at on that list as well....that's ALL i'm saying.
 
Hi! :)

For my part, if someone releases a new version, without the faults of the other I would sell it a little less than I bought it, but not before :saint:
 
The psikyo sh2 multi list isn't gone. The most recent kit, maybe 4 months ago, went to Buffi. Go to that thread and go back a few pages to see the a-p list.

I doubt it's being added to since it was hidden for a time. I do feel for everyone that can't get an account over on neo-arcadia.
 
Looks like I got plenty of time to decide on getting one due to that waitlist on Neo-Arcadia
 
bagheera369 said:
DUDE....I'm not talking about the AW list....I see my place on it, it's fine.

I'm talking about the Psykio list, where we had a list here, and a list there, and the list here was taken, and is being gone through, but no listing of the AP list over on NA forums, and no real way to keep tabs on it.

I'm not attacking AJE in any way...I understand his operation, we all do by now.....I just would like to be able to visually tell where I'm at on that list as well....that's ALL i'm saying.
Click to expand...
list here (of course , in the meantime , many from list already received) : https://www.arcade-projects.com/threads/psikyo-sh2-multi-from-aje_fr.18285/post-387884

and this is the page (4) where everyone got it from Neo Arcadia (many of the guys also asked in the AP theard for it) :

Page 4:
56 - s_ghislain (#80) mp envoyé
57 - psykom1 x5 (#81) mp envoyé
58 - PastBlaster (#82) mp envoyé
59 - pxl3d (#83) mp envoyé
60 - opt2not (#86) mp envoyé
61 - melkia (#87) mp envoyé
62 - 8bitforlife (#88 )mp envoyé
63 - parodius (#89) mp envoyé
64 - AlxUnderBase x3 (#90) mp envoyé
65 - Isimorn (#91) mp envoyé
66 - djsheep x2 (#92) mp envoyé
67 - ekorz x2 (#94) mp envoyé
68 - Derick2k x10 (#95) mp envoyé
69 - Mrhide (#96) mp envoyé
70 - Juju Kenobi x2 (#97) mp envoyé
71 - nem (#98 ) mp envoyé
72 - ShootTheCore (#99) mp envoyé
73 - Rodrigo (#100) mp envoyé
 
Last edited:
Glad you got yours. If you get the chance later, snap some pics!

I'm trying to keep a bi-weekly watch on the forum, to make sure I don't miss when the messages come in for mine.
 
Here is the bad picture of it running:
1737594344098.png


The housing quality is absolutely choice.

As for waiting your turn, I'd recommend just setting up an email alert for PMs. If I didn't have that set up I would have missed the 1 week reply window.
 
bagheera369 said:
Glad you got yours. If you get the chance later, snap some pics!

I'm trying to keep a bi-weekly watch on the forum, to make sure I don't miss when the messages come in for mine.
Click to expand...
Check your settings I discovered that email notifications for PMs was disabled on my account!
 
I suppose since I'm here, how do most people connect these things? Pure JAMMA, or VGA? I can't think of a reason I wouldn't use VGA if it were an option. Any other general "Atomiswave" tips?
 
If you're using vga and jamma for controls the AW still outputs RGB over the jamma edge even with the dip set to 31khz. I had to use kapton tape over the edge where the RGB lines are. Found this out since I use it with a UVC to downscale in my astro.
 
plasticfactory said:
I suppose since I'm here, how do most people connect these things? Pure JAMMA, or VGA? I can't think of a reason I wouldn't use VGA if it were an option. Any other general "Atomiswave" tips?
Click to expand...
1. DIP switch 1 on the motherboard controls 15Khz/31Khz output. *EDIT* what @astro_zombie138 said above
2. Get a @everten Stereo Board for glorious sound
3. Play "Sushi Bar" -- that game rocks!
 
Has anyone ever had Atomiswave motherboards freezing randomly and frequently?

I have two here that seem to have this issue, have tried everything to troubleshoot them (voltages, different supergun/cabs) with no luck...
 
djsheep said:
Has anyone ever had Atomiswave motherboards freezing randomly and frequently?

I have two here that seem to have this issue, have tried everything to troubleshoot them (voltages, different supergun/cabs) with no luck...
Click to expand...
can't say I've ever run into that, though assuming solid and clean 5V next thing I would check is cooling fan and thermals, maybe caps
 
You must log in or register to reply here.
Back
Top