Search results

Yup, that goes to the volume pot located under the control panel.

The Expander is not receiving any video from the DE10, for whatever reason. Your HDMI led is on, so at least it's getting something from the the DE10. I would try a different HDMI cable, just to be sure - and also verify that the DE10/Mister Setup is working ok by changing video settings and...

What does the video info page on the OLED say?

Very nice! :thumbsup:

I quickly grew tired of the cable swap/EDID stuff and just made a cable to avoid the issue altogether: The only thing you need is RGB, H/V sync and GND, which will all EDID/monitor detection schemes. You can accomplish the same by pulling pins out the connector of a pre-made cable.

I actually tried to make this 'caseable', but it was tricky because of the OLED and JST-VL connector, so didn't bother. Most of the stuff on the PCB is covered by the DE10, and the edges are riddled with connectors and buttons/switches so not sure if there would be much utility.

What is the product called, what is the name?

Depends on how long you want to make them, but in general I would never use smaller than 18AWG, unless you like voltge drop - use 2x18AWG for 5V, 3.3V and GND (important..).

For those not on twitter, 10% discount this Christmas - ends Monday 20:00. https://irkenlabs.com/product/jamma-expander/

For those not on twitter, 10% discount this Christmas - ends Monday 20:00. https://irkenlabs.com/product/jvs-expander/

I don't PARTICULARILY like that this product is referenced to as JAMMA/JVS expander around the Internet.. https://www.bilibili.com/video/BV1N8411x728/

Depends on the TV, the Expander outputs 0.7V RGB and TTL(5V) sync. If the TV handles VGA, should be no issue. It's primarily designed for JVS cabinets.

Available now :) https://irkenlabs.com/product/jvs-expander/ The website is a little thin as of right now, but feel free to ask any questions here.

It's here, grab one while available :) https://irkenlabs.com/product/jamma-expander/

Soon :thumbsup: https://irkenlabs.com/product/jamma-expander/ This revision use the same firmware as the previous, so it looks like this one will be out first. The JVS Expander still needs a couple of firmware tweaks.

Yes, it has a keyboard mode like the JVS-PAC 2 and a 2xgamepad mode. It will function like the JAMMA expander. As for MVS on mister, I can highly recommend the insert-coin script https://github.com/funkycochise/Insert-Coin_Res This will install blackwines mvs core, that gives you MAME keyboard...