neo geo 4 slot mvs coin door ac power switch issue

[corruptedexe]

So I recently purchased a 4 slot cab everything is working on it minus the coin Door ac power switch so I opened the cab found the disconnect only to realize the psu in the cab doesn't have a 4 pin connecter, the psu is a suzo happ power pro is it possible with this psu to rig up the coin slot ac power switch or a toggle switch to turn on and off the cab

 

[duffcon]

Yes, you can put a switch inline with a standard switching power supply. The wiring is outlined here:

http://www.therealbobroberts.net/acwiring.html

Note that this setup only switches the hot side. Personally I would use a DPST toggle and switch both hot and neutral.

Alternatively you can just replace it with the HAPP 200w powerpro that has the 4 pin remote harness ready to go, it's only about $45.

https://www.amazon.com/Suzo-Happ-Power-Switch-Supply/dp/B00907X8EO

Note that this isn't an exact match for the OEM power supply but it is functionally identical. The OEM p/s is larger so you would have to figure out a way to mount. in the MVS it just sits on the base so not really a big problem.

 

[corruptedexe]

Yes, you can put a switch inline with a standard switching power supply. The wiring is outlined here:

http://www.therealbobroberts.net/acwiring.html

Note that this setup only switches the hot side. Personally I would use a DPST toggle and switch both hot and neutral.

Alternatively you can just replace it with the HAPP 200w powerpro that has the 4 pin remote harness ready to go, it's only about $45.

https://www.amazon.com/Suzo-Happ-Power-Switch-Supply/dp/B00907X8EO

Note that this isn't an exact match for the OEM power supply but it is functionally identical. The OEM p/s is larger so you would have to figure out a way to mount. in the MVS it just sits on the base so not really a big problem.

thanks so much for the info