What's new
For Sale

davkilik

Student
Joined
Apr 9, 2019
Messages
21
Reaction score
12
Location
France
Hi all,

Remote with Extended Menu fo New net city and Egret 3

Remote boards with Extended Menu for New Net City and Egret 3 with Toshiba chassis only.
It allows to set geometry, colorimetry and high contrast mode to fine tune the picture which is impossible with the original remote.

IMG-1804.jpg


IMG-1805.jpg


As you can see, it fits like a glove in place of the original one, it's just a matter of removing and replacing two screws and reattach cable.

IMG-1807.jpg


IMG-1808.jpg



Asking 35 euros per board.


Remote Sanwa PFX Extended menu

Remote for Sanwa PFX turntable with the possiblity of activating the service mode ( Extended menu ).
The Pcb was designed to mount in Naomi or New Net City Arcade cabinet.

Original remote:

249-C990-F-2-D53-4-D87-AF46-4-F42-EAC73-B63.jpg


Remote with extended menu :

3-E3921-DA-22-C2-44-DF-95-A0-F980-E8-C3763-D.jpg


Two washers are required for perfact assembly ( included ).

BECC83-F1-C6-DF-4-B59-804-B-CE2731-BDAC93.jpg


To enable service mode, you must set the red dipswitch to ON and turn on arcade cabinet. Once arcade cabinet is turneed on, return the dipswitch to OFF in order to be able to navigate in the menu.


Asking 30 euros per board.



Repro remote Nanao MS2932 ( Naomi Cabinet)

IMG-2503.jpg


IMG-2504.jpg


IMG-2505.jpg



Asking 50 euros per board.



Repro remote Sanwa 29E31S (Naomi Cabinet)

IMG-2501.jpg


IMG-2500.jpg


IMG-2498.jpg



Asking 50 euros per board.


Repro remote Nanao MS9-29 (New Astro City Cabinet)

IMG-2526.jpg


IMG-2527.jpg


IMG-2528.jpg



Asking 50 euros per board.


Repro remote Nanao MS8-29 (Astro City Cabinet) and compatible with Ms8-25

Original
IMG-2731.jpg


Reproduction
IMG-2774.jpg



Asking 50 euros per board.



Repro remote Nanao MS29-31 ( Blast City Cabinet with automatic chassis )

FAB88053-4-F12-4480-A0-AB-0-A15-DF3-BE95-F.jpg



Asking 25 euros per board.


Repro remote Nanao MS29-30 (Blast City Cabinet with manual chassis)


IMG-3070.jpg


IMG-3071.jpg



Asking 50 euros per board.

Repro remote Toshiba PB6643 (Konami Windy 1 & DDR)


Unknown.jpg




Asking 50 euros per board.


VGA connector for New Net City tri-freq Toshiba chassis

IMG-3653.jpg


IMG-3656.jpg


Same as the original.

Cable provided.


Asking 28 euros per board.
 
Last edited:
NEW!
Remote for Toshiba PB6643 chassis for Windy 1 and DDR Cabinets . ;)
 
I already take lot of this remote, better than original with new aspect, very nice look and very strong part, higly recomended.
 
Back
Top