FS FS: 3d printed repro Sega 5380/5382 and Capcom P5001/P5002 keys

[XeD]

I am selling 3d printed repro of the following keys:

Sega
5380
5382

Capcom
P5001
P5002

Price is as follow in USD:
1 key = $12
2 keys = $22
3 keys = $30
4 keys = $36

Shipping is as follow in USD:
USA = $8
France = about $15

I am currently at revision 1.2 and the keys are dark green in colour. The key is hand sanded so there are scratch makes on insertion part of the key. The keyring part with the key number has a sligh texture from the painter tape.

 

[mR_CaESaR]

These are awesome!

Is there a risk of the key snapping when you turn it or would it be the same risk with the original keys?

 

[XeD]

Being 3d printed there is always a risk due to the cut out of the keys. If the key is fully insert and you don't force it, if the lock is jam/seize. You should be fine, but time will tell. From the handful that I sold I had no concern about that yet. The only one I would keep an eye on would be the P5002 as the cut out is closer to the releasing pin cutout compare to the P5001

 

[DangerousDad]

Hello,

Could my coin box lock be one of these?

I will also PM later about ordering some 5380s if you still have some. But just wondering if I can get lucky with a key without having to drill it out

 

[mybff]

Hello,

Could my coin box lock be one of these?

I will also PM later about ordering some 5380s if you still have some. But just wondering if I can get lucky with a key without having to drill it out

That almost looks like a miwa key. Very similar to a 5380. I could be wrong tho!

 

[Ziggy Cheetos Dust]

Are these quite tough? I’m interested but cautious as some of my lock tangs are quite firmly seated when locked. What material did you print with?

 

[Neodogg]

I wonder if you can use those to make a mold to cast your own keys out of brass or something?