Hackcell
Grand Master
Got this CPS 1.5 board (cadillacs & dinosaurs) without the filter board. Can anybody guide me what’s the pinout of the edge connector located at the B board?
from: https://wiki.arcadeotaku.com/w/CPS1#CP_System_Dash
| Solder Side | Pin | Pin | Parts Side |
|---|---|---|---|
| 12 V | 1 | A | 12 V |
| GND | 2 | B | GND |
| - | 3 | C | - |
| - | 4 | D | - |
| JAMMA Speaker - | 5 | E | JAMMA Speaker + |
| CN-4: 9 | 6 | F | CN-4: 10 |
| CN-4: 7 | 7 | H | CN-4: 8 |
| CN-4: 5 | 8 | J | CN-4: 6 |
| CN-4: 3 | 9 | K | CN-4: 4 |
| CN-5: 9 | 10 | L | CN-5: 10 |
| CN-5: 7 | 11 | M | CN-5: 8 |
| CN-5: 5 | 12 | N | CN-5: 6 |
| CN-5: 3 | 13 | P | CN-5: 4 |
| CN-6: 5 | 14 | R | CN-6: 6 |
| CN-6: 3 | 15 | S | CN-6: 4 |
Hackcell
Grand Master
Thanks!