SOLD 3x Blast City Candy Cab Projects - Seattle WA

[trashedcabs]

These are sold. Thank you to those who picked up--I am so happy to have my garage back.

Spoiler: old post

I have 3 blast city project cabs to offload. Life situation has changed and I need all excess projects out, so I am selling these at cost AS-IS. If they don't sell then I'll just keep them and finish them eventually, but I'd really love to have my garage back.

The good:

• All cabinets are complete, minus rear monitor cover doors
• All cabinets tested working
• All cabinets and monitors disassembled and deep cleaned. No horrific cigarette tar.
• Two cabs come with new in box Sanwa 2L12B stainless panels, fully populated and include harnesses. These cost me $200 each.
• Power supplies, amps, and monitors have all been recapped and tested
• All wiring looked over and all operator hackjobs repaired
• All of the disintegrated speakers have been replaced
• All doors have been powder coated. The color does not match exactly but they used to be cigarette brown, so trust me it's better.

The bad:

• They all have the typical large stress cracks on the main body under the control panel corners. I began the work of patching these up, but this is where I ran out of time. They will need to be filled with resin and glass mat, sanded, and painted to properly repair them. I have done this work a couple times but life prevents me from doing it 3 more times right now.
• All otherwise cosmetically average condition, typical gel coat issues, scratches, moderately stained decals etc
• They are all disassembled right now. I can reassemble for transit if you prefer.
• Like seemingly every candy these days, they are all missing the rear monitor cover doors.

Cabinet 1:

• MS-2930 trisync monitor. Working, recapped and serviced. Noticeable Gradius burn.
• Regular JAMMA-only harness
• Includes brand new in box fully populated Sanwa panel set.
• Price: $1200

Cabinet 2:

• MS-2930 trisync monitor. Working, recapped and serviced. Minor burn.
• Regular JAMMA-only harness
• Has a non-matching 1p Namco panel.
• Price: $1000 SOLD

Cabinet 3:

• Your choice between a working, serviced Sanwa E31S VGA-only monitor with noticeable Insert Coin burn, or a non-working Nanao MS-2931 trisync with average burn. I gave the MS-2931 a cap kit but ran out of time to investigate further.
• JVS/JAMMA combo harness
• Includes brand new in box fully populated Sanwa panel set.
• Price: $1000

Pickup only about 30 minutes outside of Seattle, 15 minutes from Bellevue. I can reassemble them for you for easy transit, or give them to you disassembled.

 

[RoseCity__]

Sent a PM

 

[Jonny]

i have a spare rear cover if someone nabs these, maybe i have two. it's a reproduction, however.

also monitor bezels and a kick plate