Search results

Welcome, there are a bunch of us here in L.A, feel free to reach out for local support if needed...

I'm wondering if someone has the proper fixture (Dimensions) for a big blue's marquee, I want to get an LED setup, but I think if I put in a Neon Tube fixture if someone wants to later on retro-fit it with an actual neon bulb they could. But I'm wondering how long / what type the original...

This is how it ended up, and works. (I removed the sketchy punch through wires) And you'd need to move the connector at the top over to CGA/EGA as well... (To make it work)

Funny, before I posted I tried to put the wire just in the V/S Slot.. and remove it from H/S as well as removing the ground, all of which made it worse... but as fate would have it the only thing I didn't try was putting the white wire into the H/S slot, and it works straight out of the gate....

Cool, thank you that makes a lot of sense, I lacked the context for why the pins were repeated...

So this was from another WG (Different) monitor, that I had in the past... so what you're saying is I only need Horizontal Sync H/S ?

So I found this manual... https://www.arcade-museum.com/manuals-monitors/Wells-Gardner-27d9200-33d9200.pdf It shows pretty well how it's supposed to work, the issue is I get these glitches in the sync when I go through the RGB Molex KK 10 pin Connector. This is with VGA ...

I just got mine, but with no harness and no PSU, I had to "Hot Wire" the monitor... and then hook up one of my MiSters but it worked, and looked amazing on a CRT... I was wondering where I could get the Vinyl for the pieces I'm replacing at the front, the particle board is all rotten... but...

I'm still not 100% Certain, but a couple of things, when I had the issue initially I had patched the Pi to the latest version, When I then Re-Imaged the SD, from a download 6-1-4 I believe, I then tried to turn on both Open JVS, and Power Save, and it did the same thing (I also didn't have the...

After 2+ years of the wipi netbooting working, I encountered an oddity, where once I re-booted I got into the Wipi right as the AP showed on my phone, quickly went over to a game, launched it, and it got 26% done, and the whole thing shut down, I see the Network Port light go out, and no...

I'll take a Full Kit...

256, It has a Switch and can play both 246 and 256 games (as I recall there are 1-2 exceptions), but that device you posted the quote on, is at this point Vaporware... or Unobtainium... pick your metaphor... so depends on what you're asking / referring to... the 256 or the Key/Dongle

I'd buy one if offered for sale..

Not Currently

IDK how else to test it, it has a SCSI port, and you could attach a CF Card Reader and see if the Dimm is good / IE if it can read any games... otherwise I'd send it to Ken @ I Can Repair Sega...

Could be you have a bad daughter board... for the Net-Dimm... maybe you have someone near you who can lend you a known working net-dimm, otherwise I can try and grab a picture one of mine, and you can match the dip switches.... but I suspect the Dimm Board...

Ok, well if you can't ping it from the PC, then there's no hope for the Pi

If you can, try and connect a KB-Mouse to the Ras-Pi, and see if you can ping it from the Pi...

Can you ping the Net-Dimm from the PC?

I mean that makes good sense... Sony wasn't concerned or aggressive about arcades (they make most of their money with licenses for software), and licensed the tech to 3'rd parties for Arcade Hardware but this is a one shot deal. This was likely more of a distraction than a serious profit center...