Search results

I’ll take the AW multi!

Great price on that Martial Champion

Welcome!

Welcome!

I would be in for one set. Thanks!

Just wanted to jump in and say that I have a MV1FZ and the latest DS multi is working fine both in a NAC and HAS supergun setup. Both the NAC and HAS have PSUs rated for 7A+ and have 16AWG wiring for 5V and DC ground. The motherboard was recapped and it has the stock BIOS. I’ll gladly keep...

Nice combo!

Great job Welcome!

There’s a sign in the corner that reads, “Heroes work here” How very true!

A clean original and functional Mini Cute with the correct monitor probably goes for around $3,500USD. Here is the PRICE CHECK THREAD where you might get more responses.

Sorry to hear about your mom.

Anyone get a response from @maxwell ? I sent a PM looking to buy but never heard back.

Would this be a good guide to wiring in the isolation transformer?

A New Astro City uses about 140W while on. That means that the cabinet is drawing about 1.2A when running on 120V or 1.4A when running on a 100V system, as designed. However, appliances like CRTs have a spike in current when turned on and I’ve read that best practice is to plan for 3X the...

Welcome!

9.5mm is a good thickness. The Mini Cute PCB mounting board is 9mm thick and it has been holding my Naomi just fine for a couple of years now.

I made the change. Thanks for weighing in. Regular SIMMs. I tried using another known working SIMM and got the same results leading me to believe that it’s the slot. I reflowed the solder and nothing changed. I’m dropping the board off with Jose Cruz who hasn’t met a CPSIII that he can’t fix...

Thanks, Alex! It’s okay, I have folks here local to me who can help resolve this problem for me. Full disclosure, the seller did offer me an exchange but I didn’t trust sending a board to Algeria from the US and then waiting for a replacement to be sent to me. That could take months and I...

I hate to do it because I’ve had so many very pleasant experiences on this forum but I’m leaving neutral feedback for @TheCrow I purchased a CPSIII multi from them which was advertised as working. I specifically requested a clean board with no repairs as the board they had listed had...

If running the cabinet trips circuit breakers then you have a short on the AC power side. It sounds like you isolated it to the monitor. Take a look at the monitor chassis to see if the live and neutral are shorting.