Search results

I am interested in one.

No, it was the folder structure needing Games to be the folder in root, and the individual game folders inside that one. I removed the Games folder while initial troubleshooting and moved the games folder to the root instead. The cable screwed me up at the start. Things seem to be working as...

@MostroVeneno that was it. I had things set correctly when I first tried powering it up, but the cable issue had a blank display. I restructured the card trying to find the problem and never put it back. Things are displaying and loading now. have some other issues to work out now.

:( very anticlimactic... Let me look at what I would have to do solder wise.

Ok, I have everything assembled, and after sorting out a bad crimped cable issue am having an issue that has stopped me from being able to test this. I have tried 3 different SD cards from 3 different manufactures. Watched @ShootTheCore s video to get the card details, have them formatted fat32...

Interested, either would work, but simpler is best.

HSS Order # 41150 Interest Check #291 Thank you very much :D

I'm Interested in one.

I got a rev 7 board before the GALs showed up, and the multi kit worked on the first install and second power up (after reseating the A and B board). Everything I have selected is working. The multi kit was not playing nicely with my rev 3... Thank you for the help. Have there been other...

I could not find any spares, so I had to order more GALs. I was having issues last night, but I did see some variations on the graphical issues. I'll let you know if I have different results hopefully by the weekend.

Sharp eyes, it lost the leg and was repaired. It was originally on a CPS1. It has been reading and writing fine, and due to bending a leg up to solder I wanted to use it first. I'll prep an alternate then to rule it out.

No, I programmed both the f/G and the B (for AVP). I can recycle the B or I have another unused Gal somewhere.

OK, I tried adjusting height on the main kit board from the B via the 2 3 row connectors and if anything it decreased the sound quality. I have mostly been trying the B with out the plastic shell, but the A has been cased/unopened. @@Mitsurugi-w The wire is spliced, there is no jumper under the...

Here are the jumper settings I had set prior to the multikit:

Trying tinypic, and almost everything I send is failing... The jumpers were set properly for the AVP setup I used, and I did recheck after I had problems. The pins all aligned and are in the sockets. I will try to make a smaller gauge wiring for the key writing. I used what I could easily...

Both those games are running and responsive. I have a video of Xmen vs SF showing it in motion, but am not sure how to post it. I did both PALs lifting the corresponding leg. the image is the F, I started with it as a G with pin 9 up. I did try the unencrypted AVP I was running on the board...

Hello, I received and installed a new multi kit last weekend on a SSFII gray rev 3 board and am not having much luck. Originally the board had died on me and almost sent the eproms out to Razoola, but sat on them for 16 years. I recently removed the battery and converted it to an AVP using...