Search results

You could always replace the fan in it. The bearings are probably shot which is why it's making that noise.

Thanks but my goal is really just to get this one that's missing the flyback back on the road again

I have an MS9 chassis that I got missing the flyback. It was broken and I got it working, but I'm borrowing a fly from a working pcb. Anyone happen to have one? Or possibly a parts board that has severe corrosion/physical damage etc which I can pull it from. Not looking to get one of the...

Also, here's a much more legible scan of the schematics for anyone else frustrated with the awful quality of what's online. https://imgur.com/JVBf9Fj

Bought a bulk lot of these sanwa chassis. I have two chassis which both work but both exhibit a vertically twitchy and noisy picture. One of them also has the pincushion/size issue which is common on these with bad flybacks, but I have swapped the flyback with one from a 100% known good, low...

I have taken apart 8 or 9 of them for deep cleaning. Once you get good at it you can have the whole cab torn apart in about an hour. Really though; take the monitor shroud off, take the monitor out, then disconnect all the wiring that goes between the two halves. Use JIS drivers to loosen all...

Looks like these are out of stock everywhere and the repair shops want to keep their stock. Looking for a KT-2914DF flyback, specifically the dual focus version. EDIT: Found one. For future readers: the flyback FQM19A002 from the Kortek KT-2938 works perfectly, but you will need to terminate...

I'm in Washington, but I'll send you a DM and maybe we can work something out.

Bump, still looking

Bump, really need one of these

Yokes don't connect to the neck board. They are talking about swapping the video signal wire going to the neck board (where the color drive circuit is) to rule out the signal path being an issue. Since the other two colors are known working, if you swap the color signal wires going from the...

These went to their first show a couple weeks ago. I think it's the first time they've been in public since 2019. I asked a friend to remake the seizure warning and card insert stickers. I love reproducing artwork, but I'm so short on time these days that I needed to recruit some help. I did...

Looking for a yoke from either of these flat Sanwa monitors. PFX or 29PF31. Needs to specifically be the flat Sanwas, NOT the round ones. Bought one from another seller on here nearly a month ago who still hasn't shipped it, so trying to get a backup option before our next show.

SDI in the corner means Samsung SDI, their materials and components division. Nice cab, looks like a fun project!

You will need to swap the yoke. IMO, it would be better to repair the Kortek.

The dashboards were a bit of a process and I should have taken more pictures, but it's tough when you've got a lot going on and are trying to focus. They were very scratched up from people putting phones, keys etc on the top of them. Also, there were a few cracks, cigarette burns, and missing...

Been working on the rest of our fleet but made some progress since these are going to an event next week. I was missing the upper bezel mount and couldn't find any for sale. I modeled it and printed some, then used some black foam board I had handy to fill the gap. At some point, I will replace...

We just got a Quick and Crash. Incredible game, but our gun is in very poor shape. Looking for a good condition gun for any of the games which use the same/similar shell: Quick and Crash Cool Gunman Bee Panic

I also serviced the computers. I've owned probably 15 of these things over the years and can tell you that failures are almost always due to GPU cooking itself, motherboard VRM capacitors (cap plague era motherboards), or hard drive dying. These things have a reputation for dying, but you have...