Search results

Correct. I have an Sega NVS-4000 PSU which has the necessary 3.3V for JVS systems in addition to 5V and 12V. This PSU, however, does not have -5V so it’s not technically JAMMA compliant. Some JAMMA games require -5V for the sound but I don’t have any in my collection. A JAMMA-only PSU will...

The TD-IO is great! It’s very similar to the Capcom IO in terms of simplicity, (jamma edge, momo audio amp, CPS2 kick harness connector) but without the reported one frame of lag. It can also be found cheaper than some Capcom IOs especially if you build it yourself. A drawback compared to the...

Hey, there The marketplace forum is located here. You might have better luck selling there :) Good luck with your sale! PS The introductions forum is located here if you’re so inclined.

I was getting noticeable voltage drop even with a recapped NVS-4000 PSU on a stock Astro City and kept having to adjust voltage depending on the game. I upgraded the 5V and ground lines to 16AWG from 22AWG and that solved it. Now I can go from a MiSTercade to a Naomi netboot setup and the...

The fact that it’s rain water and not storm surge is what’s giving me hope. Sea water would have destroyed everything. Good luck to you and your buddy.

Thanks

Right I burned the image for a standard SH2 with 4th Strike to rule out that I did in fact have a custom SH2. The issue I’m having is indicative of having mismatched image and BIOS and so I tried an image for a standard SH2 after having an issues with the image for a custom SH2

Good idea, @xodaraP and @mR_CaESaR I didn’t burn the BIOS but can re-burn to rule that out.

Yeah, I’d be down for a few. The original shells are brittle by now.

Ferrite rings are still widely available

Same results with the standard SH2 image. 4th Strike won’t load with the new CD image either

It's an original cart so that's custom SH2, yeah? I'll try a standard SH2 image in case parts were swapped at some point? Thanks for the reply!

Hi, there I'm having trouble booting Warzard / Red Earth. After writing to SIMMs and choosing the region, I just get a black screen. In order to get the game to boot, I have to boot from the Darksoft menu, (hold 1P start after rebooting) and choose 3. GAME BOOT and it's the Japanese region that...

Would love to see photos of the wallcades. Lovely Vewlix. Welcome!

Thanks, Cruz and West!

Another small update I cut some new PCB mounting boards for the NAC. The size of the original board is 530 x 400 x 12mm and you get 12 boards out of one standard US sheet of 8 x 4’ plywood. [][][] [][][] [][][] [][][] My other cabinet is a Capcom Mini Cute which has a smaller PCB mounting...

Set it as close to 5V as possible as measured at the edge connector. 12V is only used for the mono audio amp. Unlike the 5V logic chips, the amplifier operates just fine under a broader voltage range.

What great set to start with. Welcome!

Most candy cabs have a simple plywood board for mounting the game PCBs. You can take measurements of the wooden board that came in your cabinet and head to your local Home Depot or Lowe’s and have them cut it. Each store is different so be sure to ask. My local store would only cut a sheet of...

Welcome!