brendan1495
Beginner
Hi all, I have just set my naomi up with a capcom I/O if I connect the kick harness atomiswave games will only boot to test mode, unplug its fine, not a big problem but is there anyway to fix this, cheers, Brendan
- Thread starter Darksoft
- Start date
-
- Tags
- atomiswave aw2naomi naomi project
First confirm that your Capcom IO has the switch to set for 2P 6-Button mode rather than 4P mode.
if that's set correct then you have a problem with your kick harness.
brendan1495
Beginner
Cheer will check
brendan1495
Beginner
No, its set to 2 player and the naomi recognises all the buttons on the jvs test but it still boots to atomiswave test mode plus if I check the buttons the atomiswave test mode recognises all of them it just wont boot the game
Given you've confirmed 2P mode and kick buttons registering this implies that your kick harness is grounding out the test button pin.
brendan1495
Beginner
That must have been it, I just rewired all the buttons and earth and its working fine, thanks for the help
