Search results

Hi Folks - selling my original GDEMU - bought back in 2018. Not entirely sure what the going rate on these is - but I will price it at $75 plus $8 for shipping. Drop me a PM!

Hi Folks! I *really* doubt anyone will need this, but just in case - I thought I would share. I have an old computer that I wanted to install an "internal" compact flash-> ide adapter, going into a PCIe adapter, so I could use the awesome tools that @rtw created for writing CF cards for...

Had my CPS1 w/multi running for a few hours on SF2, and the system died..... I rebooted it and the video signal keeps going in and out, but I do see this SCR 1 RAM NG I am guessing that "NG" means no good? Booted up 3 wonders - this is what it showed: SCR 1 RAM NG A 009083CA W 0000 R FFFF...

Hi Folks, I was helping @bgwelistyl install a DigiAV in his CPS2 - after the initial install, the colors were a bit off - so I pulled it all apart and found that one of the pins on the male headers on the chips on the A board wasn't fully making connection - so fixed that. Then we had the...

Howdy! I saw this on your site: https://www.axunworks.com/product-p902165.html Will this allow me to plug a JAMMA harness that has joysticks and buttons connected to it - and then connect it to a JVS I/O board, and then usb from the I/O board into the game console (say, a Naomi 2), and all...

Hi Folks! I have this 25" Wells Gardner K7400 with NO burn-in at my house. It was being used in a cabinet at work that I would swap games in and out of, and it started to lose the red signal after a few years intermittently. I read up on it, and got some transistors for it - but then realized...

I am replacing a P719 neckboard - and my old neckboard just had this wire soldered in, but the new (old) neckboard I got has a connector - so would prefer to get the female connector. What is this connector circled in blue, and more importantly - where can I get it? :)

I know this is a longshot - but looking to pick up another WMMT3 cabinet in the Southern California area. I have a N2 all ready to go - ideally the cabinet would have the wiring at a minimum, and as many cards as possible - FFB, IO, etc. Matt

Hi Folks, I have one of these for my bench - and it has a battery slot in the back - so of course, I want to try and see if that will work. I ended up getting a battery - and the monitor won't turn on (no AC or DC is plugged into the monitor). I took the monitor apart and at least verified...

Hi Folks! I just picked one of these up - and was wondering if anyone could PM regarding the mame version to pull the files from - hopefully someone has done the work and I don't have to duplicate... :) I did drop mspacman on there - but it doesn't have the image of the game on the main menu...

Hi Folks - any word on this? I thought I would start a thread so it's easier to see when/if its available. Thanks! Matt

Hi Folks - I have my trust 5x-pro up for sale. $250 plus shipping. Hit me up! Comes with remote, upgrade to latest version - 3.71 Matt

Hello Folks! I was over looking at marq's github for the CPS1 helper board, and it looks like he a new 1.3 version out - this version supports qsound audio through HDMI as well, and he has a note that he will be releasing a new firmware to support it. I just ordered 20 boards from JLCPCB - and...

Hello All, I just recently got a Time Soldiers PCB - and I can't seem to figure out how to make it free play. I have seen a manual - which says to flip dip switch 1, jumper 6 , and that will work. And all sorts of variations. For anyone that does have a board - what are your settings for...

Ideally - with a pair of LS-30 joysticks as well... :)

Hi Folks, I have a Lindburg Yellow multi - I just got it, and have been playing virtua fighter 5 export in VGA mode - and it's been working great. I just got a dvi->hdmi converter and played it in "HD" which equates to 1366x768@60hz. I am noticing some odd things in this mode, a little bit of...

Hi Folks, I got a LIndbergh yellow multi a few weeks ago, and its been running great. The only one minor thing is that occasionally when booting a CMOS error would pop up, and I would have to hard cycle it again to get it to boot (usually after sitting for a few days). I figured the CR2032...

Hi Folks! I got a dongle/HDD from ebay - and it arrived. Right when I booted them up in my 246 - the hard drive was not making good noises, so that wasn't awesome. I figured I would try to use chdman to write an image that I had (from the dump for the multi) - to a 4GB disk I had. That went...

Hi Folks, I have a system here at work with a CRT I have been using for a few years - a 25". In the past week or so, the green output has just died on it - occasionally, and then comes back. One of the times that it had failed, I put in a different board, and the green was still out, so i...

Looking for this really nice inline button 1-6 JAMMA remapper. Matt