Search results

HELP HELP :( I need to flip my Blast City's picture 180-degrees, so it seems straightforward enough based on the manual and what I read online. You just reverse therl right red/blue plug and brown/gray plug. Cab was unplugged, and I reversed the two polarity plugs, and now I'm not getting...

Hi all, after getting both a Dedicated and Conversion manual for Blitz 99 and the entire guts of a Blitz 99 (JAMMA harness + I-40 board + extra connectors), I had the worst time like many before me trying to convert my 2P Blitz to a 4P Blitz w 49-way sticks. I just solved my issues, many of...

Hi all, I've been reading to figure out how to get my VF4:FT disc working in my new Blast City and it's just so freaking confusing. A: Do I have to install a new power supply to use EITHER netboot or GD Roms? My cab has just a Jamma loom, no JVS. B: For the work/money I have to put in to get...

I think I turned it on when the SD wasn't in the 2nd time I used it, and didn't know it had come out. When I got it, it worked perfectly. I haven't yet tried formatting the SD card and starting this from scratch (I bought this all as a bundle). Barring that, is this any kind of common error...

Don't know anything about most of the system 32 games, so I'm not sure what is the cheapest board(s) to look for that'll concert to GA2. I've heard ppl talk about getting System32s on Yahoo Auctions Japan, but again, I don't know what board are most common / cheapest. Thanks for any help! I'm...

Naomi 2 MB was confirmed working - - seller put in a universal bios but did not have time to check turn it on before shipping. Now we re stumped as to what's going on. Both red and green lights turn on on the motherboard. All 3 fans are working. Tried 2 naomi 1 games, and also tried putting...

Just bought a VF4 FT disc, did not know it was Naomi 2 ;) So looking for a motherboard w a drive, no games or anything. Thanks! Also if you want to get rid of your Naomi lightgun stuff (HOTD2 guns, sensors, etc) I am looking for all that too!

Super fast W shipping, great communication. Sold me a few minigun boards and offered to help if I have trouble assembling. Thanks @TodoRojo!

Name says it all! Zip: 44131

I had to remove some side-art decals on my cab and want to put it on any other. Most of the sticky stuff stayed on the 1st machine. Is there specific adhesive I should try to affix it to machine #2? Thx! Or should I just bite the bullet and buy new decals? This specifically, for MKII...

As title says... Marquee light has never worked on my UMK3, and I finally changed the light bulb, and still nothing. Everything on the cab functions normally otherwise. Is this thing in the pic I removed a fuse? I looked in the manual and it doesn't list anything like this in the parts under...

I've had this Irken Labs Retro Scaler A1 and have not successfully made a cable to actually use it. I need a custom SCART adapter for consoles but no one seems to make a female SCART to male RGB Db15 (pinout in the link). I've contacted the big SCART cable makers but haven't had luck on my...

Hello, I just got a Naomi setup, and was looking for a thread on what all you need to play lightgun games. From what a forum user here helped me with, seems like you need: -A sensor for each lightgun -Lightguns (will HOTD1 guns work w Naomi? Or are they different tech?) -Sensors you mount on...

Just got a Naomi setup and would love to play VT on a cab. I understand they're not exactly in demand. There are a few international ones on ebay for $100, so would prefer the going rate from someone in the comunity who doesn't really use theirs anymore.

A HAS just sold here for $109 shipped (I'm in Ohio) - let me know if you have one available and the price works for you ！ Building a minigun is a much bigger project than I realized and I just don't have the time atm, and have an event I'd like to show off 3s or Alpha 2 next month. Thanks! I...

I need one for an event next month and they're always out of stock. I'll give it a good home forever and it'll get tons of use! If you know of another JAMMA video out device or way to get Midway boards (NBA Jam, MKII, etc) to display on an OSSC, feel free let me know. I have a super old...

Heyo, got my Darksoft CPS1 working last night -- awesome! I have a bunch of 4P harnesses for other companies, but not one for CPS1 or CPS2. Googling, I can't seem to find any CPS1 3P/4P connectors for sale. I've got the pinout but would rather not have to make my own cables. Anywhere to get...

I have a super-old MAS Jamma-to-NTSC board I'm just now needing, and it never had RGB wired into it for some reason. I tried soldering a male-to-male SCART cable , one side to the board and the other going to my XRGB-2+, but I don't get picture. I've just wired each line to what I'm pretty sure...

Hey, working on my cab, and I banged the board by accident, and when I reset the cab, now the monitor has a weird demarcation line I can't get rid of with vertical hold / position / size knobs. Here's a still and a video. Does anyone have an idea? It's an NBA Jam cabinet. When I go back to...

Hey all, I have one of the old bootleg 18-in-1 CPS2 boards like 2010. Works great, never used it much. I'm just getting back into this stuff as a hobbyist, and I saw now that you can swap ROMs yourself on official B boards now. I reprogram/solder console cartridges, but I've not worked on any...