- Thread starter BuddyC
- Start date
Mrhide
Enlightened
I heard these are nice but of course shipping is killing it
https://www.hollandcomputers.com/store/pc/Wire-Harness-c2516.htm
edit: heard meaning from this: https://www.arcaderepairtips.com/2019/06/21/buying-a-new-jamma-harness-this-one-is-the-best/
https://www.hollandcomputers.com/store/pc/Wire-Harness-c2516.htm
edit: heard meaning from this: https://www.arcaderepairtips.com/2019/06/21/buying-a-new-jamma-harness-this-one-is-the-best/
Last edited:
This is quite good, use the JAMMA connector, adapt the wiring.
https://www.tops-game.jp/products/detail.php?product_id=2820
https://www.tops-game.jp/products/detail.php?product_id=2820
If they're of use I've got a few of these left over from when I was making JAMMA>JVS looms. They're partially wired up until this point. I ended up moving to Hirose edge connectors part way through a batch.
LH GND pins have 3x 24/0.2 wires and 2x 16/0.2 wires
5v have 3x 24/0.2 wires
-5v have one 24/0.2 wire
12v have 3x 24/0.2 wires and one 16/0.2 wires
RH GND has 2x 24/0.2 wires
24/0.2 wires are 80cm long
16/0.2 wires are 230cm long
AlxUnderBase
Enlightened
I don't think this harness or Holland Computers in general are very good. This is just the usual cheap Chinese harness. All the things they sell are just cheap Chinese products with an American flag on them.
This is my go to if I need a new harness from the US:
https://twistedquarter.com/index.php?main_page=product_info&cPath=177_178&products_id=500
Great to have options!
This jamma harness will be used in a 2- player cocktail table (maybe Sega or Taito - 1980-1981-ish - No ID on or inside the table) with a Hantarex MTC900/E chassis.
Keep em coming if anyone has any other suggestions!
This jamma harness will be used in a 2- player cocktail table (maybe Sega or Taito - 1980-1981-ish - No ID on or inside the table) with a Hantarex MTC900/E chassis.
Keep em coming if anyone has any other suggestions!
ImportantBet
Grand Master
missed opportunity on 'Sega New Cock City'
LittleLarrySellers
Professional
+1 on Twisted Quarters - I use their JAMMA extensions with my switchers and no issues.
ImportantBet
Grand Master
Really appreciate it, but a good buddy gave me his spare harness yesterday. Thanks again!@BuddyC found a barebone harness I could give away for free if you can spot the shipping cost
It's just wires hooked up to a fingerboard atm but you can source any 56p bus connector of your preference (Hirose, ZJAMMA, Taiwan Future, etc.)
